Hey all, when I cycle my bolt firmly on my Axis .223, it will occasionally cause the rifle to fire. I know - EXTREMELY dangerous. So now I need to find out what might be causing this. If I cycle the bolt and follow through gently it never happens. Only when a firmly cycle the bolt - which is how I normally do it. Let me state that I did the YouTube special Axis trigger mod. I cut a coil off of the spring, could this be the culprit? What about headspace? I've done the safety checks since I cut the coil. Engaged the bolt then slammed the butt of the rifle onto a padded floor to see if it would fire, etc...
Thanks