Hey guys I was having problems with light primer strikes.well I used some thick oil for bolt lube and it worked its way onto the firing pin.I disassembled the bolt cleaned and reasemmbled.I put the bolt head on 180 off so it wasn't extracting lol so I went through the process again.when I put I back together I lost a piece.and I can't find a pic of my bolt online. Mine goes bas,spring,spacer (the part i lost) spring,then remove cocking pin? Then the firing pin slides out and that's it. There is no long spring in the middle like all the other pics. Its a savage 110 hunter .300wm. I'm just looking for a layout or parts list thank you.