Has anyone noticed a change in accuracy after removing the action from the Accustock? I've googled quite a bit but can't really find a consensus. I thought I'd ask Accustock owners about their first hand experience with this issue. To adjust the Accutrigger, the Accustock needs to be removed. Even a simple trigger cleaning means removing the Accustock. The accuracy issue seems to come from the action screw torque. Assuming they are torqued at 45# at the factory. I read a post somewhere about the retorquing procedure and it seems pretty straight forward. Front screw, rear screw in increments until you reach 45#. I'd really like to lighten my Accutrigger pull but I don't want to do it and find that the rifle doesn't shoot as well after putting the Accustock back on. Comments welcome.