Which Boyd's 110 stock for a 220F?

[JimTh]

Summary of what we know:
-220F and 110/111 bottom metal are not the same size. The 110 is longer and the 220F appears to be inlet further back. 220F bottom metal will not be drop-in in a 110 DBM stock.

-220F and 110 action screw spacing is the same.

-220F and 110 receiver diameters are the same.

-One person in this thread has inlet a Featherweight Thumbhole blind mag stock for a 220F. Invoice listed "FEATHERWEIGHT THUMBHOLE SAVAGE® 110 BLIND MAG LONG ACTION CENTERFEED FACTORY BARREL CHANNEL PEPPER LAMINATE". Barrel channel was opened and bottom metal was inlet.

-Boyd's has said that the Classic barrel channel can be opened up to 0.920" without weakening the forend too much.

-220F barrel channel is about 1.0".



Original post below:
I've found bits of info here and there pointing to a 110 DBM stock. Can anyone confirm or deny? I know for sure the receiver diameters and screw spacing are the same, I'd just like to know if I can get the DBM and avoid a lot of inletting or if I have to get a blind mag centerfeed and start cutting.

Jim