Morning All,

I have a new Savage Model 11/111 Hog Gun, 20" Threaded barrel, in .308. Topped with an 8x32x50.

After shooting 6 rounds, the last one fired (#6) sticks in the chamber until the barrel cools several hours later and then comes right out.

Does this with factory and reloaded ammo.
Reloads are under 2800 FPS & Factory stuff is right at 2800.
Doesn't matter what bullet. (Have only shot 140's & 165's)

Let me explain how I shoot now.

I get set up, load one round, sight & shoot.
remove fired case from gun.
Sight where round hit w/ spotting scope.

repete.

So, I am not loading the magazine full & just blasting away, I'm taking my time !
This gun has less than 90 rounds fired through it. I think the count is 84 right now.

I took a good sized factory case, JB welded it to a 12" rod and put polishing compound on it.
(Mothers aluminum polish - not abrasive)
and by hand, incerted it into the chamber and rotated it for like 5 minutes and a little in & out also.
trying to polish the chamber a little bit more. It seemed to help. I got 6 rounds fired before a stuck case.

I'm at a loss here. This is my first bolt gun.
I've always used gas guns.

Any help would be appreciated.

Thanks
-aka:Cliff