Finally got a chance to get the rig out to the Range and try out my loads with my 110 FCP Lapua. Unfortunately with things being the way they are I simply cannot find any H1000 (which everyone seems to have success with). I am using Win. Supreme 780 as it showed the best accuracy results in the new volume Speer manual (the only book I have). I performed a ladder test a found 82.2 grns of Sup 780 with Berger 300 OTMs group the best. I was doing my test with the COAL .015 off the lands but quickly discovered they were to long to load in the mag. I was performing the test at 200yrds with my final COAL at 3.75 and my best group was 1.3 MOA with an average velocity over 5 rounds of 2563 fps. I have only had this rifle a few months and only put 48 hand loads down the tube (during testing) and 72 "FUN" factory loads when I first bought it. I guess my question to the more experienced 338 lapua shooters would be: Does this sound like a decent workup? I was expecting a little higher velocities but im not sure I want to run a hotter load and wear out my barrel faster. Im not too,too worried about the group size because im still getting used to the rifle and it could have been just me. I have read other people getting better results though. Any comments would be extremely helpful.

Thanks,
David