I recently purchased a mod 12 and have a question about the magazine. It would not feed the last round well as the bolt would pass right over it. I called the company. It's great that they will talk to you on the phone but was a bit confused when the lady it needed to be adjusted. I wasn't aware this was an option, she told me there are not instructions for this procedure, you just bend the mag with pliers until it works right. I seem to have it "adjusted" now but would rather load one at a time on the bench anyway. I only own two other clip fed bolts and they don't like to be loaded like this either. I read somewhere that you can buy an accesory that allows you to hand feed from the top with the clip in or it replaces the clip and puts the bullet where it needs to be so the bolt can feed it in properly. Is there such a thing?