To explain this most accurately this trigger worked like a 2 stage trigger almost, just awful. This is not an accutrigger it is their cheesy factory one with 5 adjustment screws. I have had 2 different gunsmiths work on this gun. When the trigger was where I wanted it the safe would not engage or when it was adjusted so the safe would engage slamming the butt moderately and the trigger would go off. putting the trigger adjustment back to its original spot it worked and was safe but the drag/creep was not noticed by the once a year deer hunter ( my buddy and my brother ) but me being a reloader/ shooter it is very noticeable. Now I'm no gunsmith but this trigger and adjustments are pretty straight forward.
A post on varminthunters.com suggests "Lubricating the sear with a dry moly powder and dry firing 40-50 times" 1. Will this work ? 2. is the only place to find moly powder on line for $20.00 plus shipping (large container which I don't need) It also states this trigger SHOULD NOT be stoned or filed. Unfortunately a replacement trigger is not in the budget. Thanks in advance. P.S I looked pretty hard and could not find this particular subject addressed
Reply With Quote
Bookmarks