I have taken off more than a dozen factory barrels for myself and friends. Some harder than others to break lose. I picked up a pawn-shop beauty 110 a few weeks ago. Started the barrel off a week ago... barrel in the blocks and a few good pulls on the barrel nut wrench tell me this isn't the typical barrel. So I the soak the threads with Kroils for 3 days. Mounted it barrel blocks tonight few hard pulls on the barrel nut wrench and no go. So I break out the Wheeler action wrench. Tighten it down good. No good. Holy smoke how tight can this be? I add a 24" of 2" pipe of the barrel nut wrench and through the weight to it... No freaking go.... I am 284 lbs. Your kidding me. I break out the 4 lb shop hammer. It took a dozen hard blows on the barrel nut wrench before it moved. I flatten the heck out of one side of the wrench before it broke lose.

I humbly bow.... I have finally met the legendary Savage gorilla that tightens barrel nuts...

May you forever avoid meeting him, Tim