Ok, I have loaded for a fair amount of standard calibers and a few of the Improved versions, but I have yet to tangle with the 6mm-Rem-AI. I am wanting to build a new rifle in a 6mm bore that will shove the 105 A-Max up past 3300fps. In one of my manuals, it lists a load of 48.0gr of RL22 (max) pushing a 100gr bullet to 3205fps for the standard 6mm Rem. I am hoping with the increased capacity of the blown out taper and shoulder of the AI version that 3300 is possible. I am looking for some first hand experience with the 105 and the 6mmAI to see what kinds of speeds are actully possible.

I do have a 2nd 6mm caliber choice in mind that would easily go upwards of 3500fps. Barrel life will be short with it, brass cost would be more, and would reauire special dies, but it would be fun. I am just trying to decide if the 6mm-Rem-AI would get me close enough or if I should take the plunge and go with the 2nd Wildcat choice.