Ive been working for weeks on this stock. I got it from Richards cause that rivet in the forearm of the Boyd's was a deal breaker. Since I was pillar and glass bedding I had the metal down to reciever and barrel, and that's how I was doing my fitting. Thinking I'm finished and putting it back together I get the magazine box and everything back on. Set it in and without screwing anything down I can see that the mag box is keeping it from seating on the rear glass by 1/4". There's not enough wood to remove from the bottom to make it fit, and The original contours by the tang would indicate that I didn't remove the 1/4" with all the hand sanding I had to do. Also the bolt dosent line up with the cut out. Bummer.