Results 1 to 6 of 6

Thread: about velocity and accuracy ??

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    acemisser
    Guest

    about velocity and accuracy ??

    Does velocity have an effecton the accuracy of a bullet ?

    If your or me is shooting a 175 grian bullet in my 308 at 250 yard
    fairly accurate at a given velocity....Well I be able to reduce this
    velocity for lighter recoil and still be able to get the same accuracy..
    My 308 is a 1 in 10 and to date this 175 is about the only bullet I have
    found that is a good shooter..
    But with a messed up right shoulder,the recoil after a few shot is making be
    develpoe a **** flinch..I hate it...I didn't want to try anyother loads
    until I got some opinions on this..Tried some 125 grain match,and it was a joke.
    So if you been then and doe that,I would like to know....Ace

    On a side note I have read where one can use cast bullet loading data with
    Jacketed bullets....I aint too sure about that..Cause it takes less to push that
    lead bullet out the barrel than a jacketed bullet...Any comment...
    Last edited by acemisser; 08-28-2012 at 03:54 PM.

Similar Threads

  1. 308 velocity
    By Remington37 in forum Ammunition & Reloading
    Replies: 24
    Last Post: 02-19-2017, 02:54 PM
  2. Velocity isn't everything
    By thermaler in forum Ammunition & Reloading
    Replies: 71
    Last Post: 04-05-2014, 05:14 PM
  3. .308 velocity
    By KTP in forum Ammunition & Reloading
    Replies: 3
    Last Post: 06-14-2012, 10:45 AM
  4. 75 A-MAX jump and velocity?
    By SergNG in forum Ammunition & Reloading
    Replies: 3
    Last Post: 09-28-2010, 05:46 AM
  5. Rem. UMC .223 45 gr JHP velocity?
    By Flatlander.54 in forum Ammunition & Reloading
    Replies: 0
    Last Post: 10-27-2009, 07:23 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •