New guy here. I have a multitude of rifles at home, several customs but my first time playing with a Savage. I decided to use a Savage for this project for its modularity and being able to do most if not all the work myself at home. So here's my dilema.

I'm building a 35 Remington on a .308 Win action with a Shillen pre chambered Savage barrel. The barrel is on order so I'm planing the other details in the meanwhile. The extractor on the present head doesn't have quite enough bite on the 35 Rem cartridge for proper extraction. So these are the options I'm considering:

- Is there "longer" extractor that might make up for the smaler case head of the 35 Rem?

- Would a PPC head have enough tolerance to work with the larger case head of the 35 Rem?

For comparaison, here are the dimension of each:
SAAMI specs for the .308 Win is .473, for the 35 Rem is .460 and PPC is .447.

Real measurements from cartridges I have at home are: .308 Win is .468, 35 Rem is .453 and and 7.62x39 is .443

The 35 Rem falls right in the middle. Any suggestions.

Thanks.