I usually use CLP for most everything and I have used it for triggers too. But, my concern is how much CLP likes to run everywhere. When I use it on the action I wipe off the excess. Seems that even if I use just a tad of it at the top of the sear to let run down the sear and to the trigger it still leaves what I think is too much behind. I'm concerned about it harming the wood under the tang. It's too impractical to take the stock off every time due to the fact I'd have to re-zero the rifle every time. Thought about using a dry lube but then there's no corrosion protection. I've heard some people say the oil is bad for the wood and will soften it and others say that theirs hasn't been harmed. It's not like it's getting soaked with it. So I wonder will a little of it end up hurting the stock over time or not?