Cock the hammer. Put a piece of tissue in the gap , so the pin doesn't fall into the action.You may still have gunk in the hole .I use brake cleaner on a q -tip, and clean it good. You should not have had to tap it out. It should just fall out.Was it the right pin to begin with.? Look it up on Numrich gun parts to be sure. The rifle pin flat should be perpendicular to the flat side of the pin to get a good hit. When you get it in ,it should just slip in . tighten the screw on the flat ,just so it will slip in and out. Sounds like dirt in the hole. The 410 is a different pin , and it does not have a spring on it.
Bookmarks