Originally Posted by
pokorn28
I use a torque wrench as well because I think it helps provide consistency across the board. I found a suggestion a long time ago for specifications to tighten things down to and have used it religiously without failure.
base screws 30 in. lbs
windage screws 30 to 40 in. lbs
alum. rings 10 to 15 in. lbs
steel rings 15 to 20 in. lbs
wood, fiberglass,synthetic stocks w\o pillars 40 in.lbs
wood, fiberglass,synthetic stocks with pillars 65 in. lbs
Sent from my iPhone using Tapatalk Pro
Bookmarks