I've owned a model 24. I would speculate that removing the barrels is likely to ruin them. They are both quite thin wall barrels. You would literally be better off sawing them and then re-finishing the ends in something like a milling machine. The 2 barrels are tied together somewhere in front and that is a structural connection. I would check to be sure there is enough material to allow for a choke. The 20ga barrel I had, I'm pretty sure there was too litte material to allow for a choke.
On mine the latch that held the action closed didn't have near enough engagement. I had to remove a LOT of material to get it to latch properly.. I speculated that if I had fired the 20ga barrel prior to fixing the latch I might have been wearing the shell in the back of my head...
Bookmarks