Results 1 to 5 of 5

Thread: Stevens 200 barrel diameter - brake ?

  1. #1
    Medic_01
    Guest

    Stevens 200 barrel diameter - brake ?


    guys.
    looking at getting a brake for my stevens 200 in .243.

    question 1,
    what is the most common thread for a brake of this cal ?

    question 2,
    what is my barrel diameter ? i have a standard stevens 200 in .243 (but not here with me to measure).

    question 3,
    anyone here done this before ?

    thanks

  2. #2
    Basic Member
    Join Date
    Apr 2011
    Location
    Wyoming
    Posts
    62

    Re: Stevens 200 barrel diameter - brake ?

    Send Ross Schuler an email. I bought 3 brakes from him and had him install them (I sent barrel and marked top/center) for $80 each with return shipping included. He can tell you which thread size to get. Also, he tapers the brake to the muzzle diameter for no charge. His email is rem40xb1@msn.com .

    This brake is 1" diameter with no taper.
    [img width=600 height=400]http://i1101.photobucket.com/albums/g431/cqh1111/savage-12-243-4.jpg[/img]
    [img width=600 height=383]http://i1101.photobucket.com/albums/g431/cqh1111/savage-12-243-7.jpg[/img]

  3. #3
    VjjR
    Guest

    Re: Stevens 200 barrel diameter - brake ?

    I have seen Ross's stuff as well, good stuff.

    The thread would depend more on Diameter at muzzle, I would say 5/8-24 is the most common but your barrel is probably too small for a 5/8. 1/2-28 is mil-spec on ARs so there is a lot of options available for that as well just open them up to the right caliber. I like going with these 2 thread sizes for most common stuff available but there is also many others available.

  4. #4
    sew0177
    Guest

    Re: Stevens 200 barrel diameter - brake ?

    Do you see much difference in the felt recoil and muzzle jump with the 243 w/break? I know its going to be louder.

  5. #5
    VjjR
    Guest

    Re: Stevens 200 barrel diameter - brake ?

    Quote Originally Posted by sew0177
    Do you see much difference in the felt recoil and muzzle jump with the 243 w/break? I know its going to be louder.
    I hear of a lot of people using a brake on a 243 so they can spot their hits, not because the recoil is uncomfortable.

Similar Threads

  1. Shotgun: Wire Diameter to Fabricate a Stevens 820 Slide Lock Spring?
    By geezerhood in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 1
    Last Post: 11-12-2017, 11:18 PM
  2. barrel diameter on Axis heavy barrel model
    By needagun in forum Axis Series Rifles
    Replies: 2
    Last Post: 12-08-2015, 07:59 AM
  3. 10p-sr barrel diameter
    By shooterfpga in forum 110-Series Rifles
    Replies: 18
    Last Post: 10-13-2013, 08:32 PM
  4. Stevens 200 7mm mag muzzle diameter
    By Shootnstuff in forum 110-Series Rifles
    Replies: 3
    Last Post: 02-14-2013, 02:31 PM
  5. Barrel Diameter
    By VjjR in forum 110-Series Rifles
    Replies: 6
    Last Post: 04-10-2011, 03:42 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •