Quote Originally Posted by GaCop

It looks like my problem solver will be 30mm Burris ZEE rings with a +10 insert in the rear and a -10 in the front along with a 20 moa base. Does this sound right?
FYI, if you use the offset inserts you have to use a +10 and a -10 in the same ring. You cannot use a +10 or -10 and a 0 in the same ring.

I'd use the -10 in the front bottom(along with the +10 in the front top). Then you can also use the +10 in the rear bottom(along with a -10 in the rear top). This should cant the scope approx 20moa(depending on ring spacing).

The fact that you currently only have 10 clicks left @ 100 makes me question whether your current rings are the same height. That scope has 68moa of adjustment, so I'd thought you'd still be able to get to 600 w/a 6.5L. With everything being a 0 cant I woulda thought you should have somewhere around 20-25moa of adj left(atleast all mine have been that way). Strange