Sometimes when switching to a different stock you will have to shorten the action screws a little.
On yours, if your wood stock does NOT have pillars in it(which older ones did not) that means that the wood is being crushed/compressed when you tighten down the action screw. After doing that multiple times eventually the screw will need shortened so it doesnt bottom out on the bolt. This is really only a temporary fix though.
A permanant fix for this would be to epoxy in a set of pillars so there is a solid metal-to-metal contact. There are many different ones available. Stockys Stocks sells the factory Savage pillars for about $10.
Bookmarks