range rat,
I recently purchased the same base along with a set of Burris Extreme Tactical (low) rings,A Barska euro 30- 6x scope, and a set of butler creek flip ups from the same vendor with the only difference being that mine is for a flat rear 110E. I took this base as a last resort as I was growing tired of the EGW mount I wanted for this build being repeatedly date changed on the back order list. I too was in awe of the quality for such a low price! The holes are all dead center. The finish is a perfect matte black as well.
I mounted it all up briefly to see how the pkg. looked and dismantled it again as I am reworking the original stock and getting it ready for pillars & Devcon while I have a bbl. & machined recoil lug on order from NSS. I did not think to check the clearance, but IIRC it looked to be in the .080 to .100 range. That is with a 30mm tube and 53.5mm obj. in the Burris low rings. I had to mount the rings on the two inner slots as the rings are wide and left little room fore and aft (about 1/4" each end) to position the tube, but it worked out spot on as the eye relief was right where I needed it to be.
All in all a great USA product for an exceptional price. I do love that!!
Bookmarks