I tried to do a search and everything that I have found the links show up as the page doesnt exist. Can anyone tell me the correct way to adjust the protrusion and how much it should be???
I tried to do a search and everything that I have found the links show up as the page doesnt exist. Can anyone tell me the correct way to adjust the protrusion and how much it should be???
Silence is golden.... duct tape is silver!!
0.040 to 0.045" is about perfect.
Firing pin should be round...nearly identical to the ball of a ball point pen (NOT a fine point).
You might try a search for Bolt head adjustments.Bill from PA did have a pictorial for that and other procedures
Bill deleted his pictures when he left.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Sorry to hear Bill is gone. He was a real asset to this site. He helped me and many others through difficult issues w/ sound, practical advise. He didn't seem to have a mean bone in his body. I wish him all the best.
I have done several searches and am coming up with no luck....
Silence is golden.... duct tape is silver!!
looks like it is totally gone. One of your guys needs to make a new one? I'm not home to do it right now.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
I use the tail of my caliper (depth mic would be better) and measure to the bottom of my bolt head and then to the pin as it protrudes. little math I get my answer. Cheap wire stripper to grab the pin through the spring slide the spring back to release the nut lock and adj till I get it where I want.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Thanks ill give that a try!!
Silence is golden.... duct tape is silver!!
Why someone would do that escapes me. ??? ??? ???Originally Posted by Blue Avenger
Whenever the legislators endeavor to take away and destroy the property of the people, or to reduce them to slavery under arbitrary power, they put themselves into a state of war with the people, who are thereupon absolved from any further obedience
we have no clue why he left. had to be mad about something to delete everything
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Sure wish I had read this yesterday, launched my rear lock washer and spent 2 hours looking for it because I turned the rear nut a little to far trying to take some pressure off of the spring. found the washer and got it done, but sure wasted a lot of time.
Thought about trying a pair of the pliers they sell for compressing park brake cable springs on the next one.
Mike
Bookmarks