Results 1 to 14 of 14

Thread: Savage Mark II BTVS .22LR One-Piece Scope Base

  1. #1
    Dead Lizzard
    Guest

    Savage Mark II BTVS .22LR One-Piece Scope Base

    Does anybody know what's available in a one-piece scope base for the above mentioned rifle? If you know, could you give the brand name and part number? Thank you. Steve

    ps. I have this rifle on order and have not received it yet.

  2. #2
    Registered User
    Join Date
    Dec 2009
    Location
    New England
    Age
    34
    Posts
    151

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    Check out EGW
    There is never enough time for reloading... *Edit* Available components finally matches my available reloading time...

  3. #3
    Dead Lizzard
    Guest

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    Thanks hcpyro13. I just ordered one. Just what I was looking for!

  4. #4
    Mr. YACYAS
    Guest

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    Make sure to post pics when you get it in!

  5. #5
    Registered User
    Join Date
    Dec 2009
    Location
    New England
    Age
    34
    Posts
    151

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    Post some pics when you get it mounted up and tell us how you like it.
    There is never enough time for reloading... *Edit* Available components finally matches my available reloading time...

  6. #6
    Rifleman51
    Guest

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    I think the nicest scope rail is the DIP. They are back ordered now while the guy who sells them has the next batch finished up, should be ready in a couple of weeks, mine is marked "Savage", but I don't think the new ones have the marking anymore, which would be fine with me.
    They clear the ejection port by a mile and fit the 93's also. They retail $37.50.

    John K
    [img width=600 height=450]http://i116.photobucket.com/albums/o18/Rifleman04/DSCF0010.jpg[/img]

  7. #7
    Registered User
    Join Date
    Dec 2008
    Location
    Naka, Japan & Georgetown, Texas
    Age
    33
    Posts
    138

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    To add to what he said, since he has almost the exact setup I will have, the DIP is either flat or 25 MOA cant, and the area behind the inlet has enough meat to mount the bubble level, like I will do when I get the base installed. The 25 moa rail is only $2 more.

  8. #8
    chiph411
    Guest

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    Where can this mount be bought,,, no results googling DIP

  9. #9
    Old No7
    Guest

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    Here you go...

    http://www.diproductsinc.com Just click on "Savage" on the left side.

    I need to get one of the 25 MOA Mounts for our 200-yard rimfire shoot -- and then buy some bigger targets too!

    Tight groups!

    Old No7

  10. #10
    Old No7
    Guest

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    Update...

    These now show as IN STOCK -- and also available in anodized SILVER too, in both Standard and 25 MOA.

    Old No7

  11. #11
    chiph411
    Guest

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    Thanks just finished ordering now to wait on snail mail :-[

  12. #12
    Registered User
    Join Date
    Dec 2008
    Location
    Naka, Japan & Georgetown, Texas
    Age
    33
    Posts
    138

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    They have thicker bottom metal in stock too, which was nice to see, after I spent more on the Savagegunsmithing bottom metal ::)

  13. #13

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    a craftsman can't realize his full potential, without finding the potential of the tools he uses....

  14. #14

    Re: Savage Mark II BTVS .22LR One-Piece Scope Base

    just found this too, also pricey
    i seen this at farrel's (0 MOA) http://www.kenfarrell.com/scan/st=db...unt/op=eq.html

    although we all would like to put "the best" on our rifles (and not knocking rimfires a bit), for around $40.00 the D.I.P. or EGW is more than satifactory, i do prefer the D.I.P.


    whether it's 0 MOA or + MOA, this is a good topic to keep going to help "the masses" with finding 1 piece scope bases, and i hope more sources of supply can be found and posted up so future 1 piece base questions can be answered with reference to the OP's topic.
    a craftsman can't realize his full potential, without finding the potential of the tools he uses....

Similar Threads

  1. Scope and ammo for savage mark II btvs
    By tk5g9 in forum Help Me Decide
    Replies: 1
    Last Post: 05-20-2015, 10:09 PM
  2. 1 piece scope base for my Savage 112
    By milcol in forum 110-Series Bolt-Action Rifles
    Replies: 0
    Last Post: 08-22-2014, 09:49 AM
  3. Replies: 16
    Last Post: 11-20-2012, 07:40 AM
  4. One piece Leupold Mark 4 base
    By Bill Daniel in forum Optics
    Replies: 3
    Last Post: 04-12-2012, 11:21 PM
  5. Weaver 20 MOA Savage one piece scope base
    By sliderspal in forum Optics
    Replies: 5
    Last Post: 03-19-2012, 01:37 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •