I am going to be inletting a Boyds Classic stock to fit a DBM system that came with the Varmint action I just got. I was wondering if anybody had any detail pictures of the inletting? It seems pretty straight forward, but I would like to take a good look at what it is supposed to look like to make sure I don't miss something or go too big. I will be using a mill to remove the wood and plan to go slow. From laying the bottom metal on the stock and looking at it, it seems like a good starting point would be to remove the bottom of the mag well, then start fitting from there.

If anybody has any pictures, or wouldn't mind pulling the bottom metal off their rifle and taking a few pictures to show how it is cut I would be very appreciative.

Also, any tips from those that have done this before I start cutting would be appreciated too.