What 20moa scope mount for ...

[NoahbodyImportant]

What 20moa scope mount for the Savage 12 F/TR and Bausch and Lomb 4000 Elite 6x24x40?

Do I want a 2 piece or 1 piece base?

Aluminum or Steel?

Any difference between brands?

Thank You

[Balljoint]

Have a one piece mount on my F/TR a EGW #4015 which is three inches longer for better scope placement in prone

[Tim300wsm]

i havea bench-source 20 moa i would go with that its a fantastic piece

[nddodd]

Have a one piece mount on my F/TR a EGW #4015 which is three inches longer for better scope placement in prone

+1 I have this one too. It is a very good base IMO


Nathan

[farmerj]

Ken Farrell are the ones I have on my plans list for when I get to that point.

[Captain Finlander]

I think the one piece bases are better but do use the two base weaver type bases on occasion. Your looking at building a competition rifle for F/TR I would go with the one piece.

[NoahbodyImportant]

Have a one piece mount on my F/TR a EGW #4015 which is three inches longer for better scope placement in prone

Thank you, looks like this one is going to be the one Im going to get.

[NoahbodyImportant]

Have a one piece mount on my F/TR a EGW #4015 which is three inches longer for better scope placement in prone

Do you have a picture you can show please? Looking to get a scope mount soon. Wondering if the extra 3" will be too much?

[Balljoint]

Try this EGW mount http://egw-guns.com/store/index.php?...roducts_id=224

[NoahbodyImportant]

Try this EGW mount http://egw-guns.com/store/index.php?...roducts_id=224

I was also looking at this:

http://egw-guns.com/store/index.php?...roducts_id=482

same thing my Heavy Duty... but still wondering if 3" is too much on my Savage 12 F/TR.... seeking pictures with my model savage, please.

[earl39]

Noah check your mail