Bill,

My barrel was already finished when I got it from Adam (Cowboyarcher) it has a .313 neck. I have no idea who did the work but it is a first class job as far as chamber and crown. I would like to get a reamer with a little smaller neck and probably will eventually. My loaded case necks from reformed Winchester 7mm/08 cases only mike .303 but accuracy so far has been pleasing. I am going to try to find some .358 Winchester brass and see if I can come up with some thicker case necks. I only have 27 rounds through the barrel so far. I fire formed twenty cases and loaded 15 of them with the IMR 4350 load. I fired 2 for sighters/scope adjustment and 2 at the deer. The fire forming loads were grouping very well, all under .5 with the best one going .238 ctc. IIRC. I'm spread pretty thin time wise right now but I intend to get serious and see just what this thing will do!

Bob