I cant remember...does the stock you have accommodate the metal surround piece? Or does it require a different stock?
I cant remember...does the stock you have accommodate the metal surround piece? Or does it require a different stock?
The Dunning-Kruger effect is alive and well.
Ah, now you're getting into an area beyond my knowledge. I just assumed the stock on mine would accommodate a metal surround. I guess I'll need to investigate that and se
Any other advice on this topic is welcome.
Thanks,
Whisper
From what I've read -- some on this forum -- the bottom metal is a direct replacement for the plastic parts on the Savage 11 XP Trophy Hunter like mine. That still doesn't seem to address the difference in magazines, but perhaps someone else can explain this.
Thanks,
Whisper
There are a number of differences, Stagger feed, Center Feed, but when asking about latches yes there are 3 different designs. The one with the plastic Shepherds Hook as you call it has been superseded by the new model that has a push button on the magazine. The other type has the latch lever actually in the bottom metal.
I have a newer 110 with the plastic stock that also has molded in bottom metal. On this one the new model mag works but the old style will not latch in my stock.
The only helpful information that I can add is the bodies of the mags are the same for the Axis and the Premium mags with the metal baseplate. The baseplates pop off and can be swapped in order to convert it to the different style of release.
Bookmarks