Choate stock....front screw constantly shooting loose, driving me nuts

[sharpshooter]

Torque the front 65 and the rear 55 in/lbs. Don't use loctite!

[big honkin jeep]

Maybe an external tooth star type lockwasher???

[MS50]

Make sure the recoil lug is in full contact with the lug recess. If it isn't, the action screws absorb the recoil, and could vibrate the screw loose. I had to bed the V block and lug in my Choate to achieve proper alignment. Might be worth a look.

[HaveBlue83]

Yep I had to go up in tq'. Wasn't enough with larger caliber. 65 65 and it held, now I can find tune the front.

I ended up bedding the v block and a bit of the lug. It's def making contact

[ice tea]

is the bolt head underside seated consistantly flush all way around, cuz maybe the face of the insert in stock is at angle, and bolt head not setaing flat, w/ only contact on one side.