Sounds like a question for Dave Hoback.
Sounds like a question for Dave Hoback.
Just get the correct part.......
"As long as there's lead in the air....there's still hope.."
Gun Shack
www.gunshack.com
Should be the same standard .308 size short-action bolt head used on any 110-series rifle.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
It is an AXIS which are long actions that use the 110 short action bolt head.
This one should work for your 270 winchester. Ignore where it says not for long actions. That only applies to the 110 long action, not the AXIS
https://www.gunshack.com/savage-part...60-338-federal
The Dunning-Kruger effect is alive and well.
This is one of the confusing parts about Savages. Some years the short and long actions had different model number, ie, 10 for short action 110 for long action. Other years they just used the 110 identifier. And there are exceptions to that as well. Basically a model 10,11,12,16 are going to be short actions, but, a 110 may be a long or short depending on the year it was made.
And Axis are all long actions with a different bolt configuration, but, they accept 110/10 short action bolt heads (at least mine does).
EDIT, quoted the wrong poster
Bookmarks