Northlander has them in stock and also has the Hogue stock.
https://northlandshooterssupply.com/clearance/
Recently rebarreled an AccuStock Savage 110 Storm (long action, 270 Winchester) & the new barrel has a slightly larger profile, preventing the barrel channel in the oem AccuStock from fully free-floating.
I’m sure I’m not the only person who’s run into this issue. What are people doing to fix this? I could remove material, but the design doesn’t leave much material in the area which needs to be removed. I thought perhaps ordering an AccuStock from a 300 or 338 WinMag may fix this, but in reaching out to Savage they (strangely) don’t sell the AccuStock individually; and I’m not 100% sure that a stock made for a magnum would bolt up? Alternatively, I could look for a used magnum profile or varmint profile used AccuFit stock? Though I fear the latter may have too large a barrel channel and look silly.
Any help is much appreciated.
Will Fissel
Eagle River, Alaska
Northlander has them in stock and also has the Hogue stock.
https://northlandshooterssupply.com/clearance/
Thanks for the swift response. Those are all marked as top bolt release, I have bottom. Looks like those are all "Will accept Varmint or smaller barrel" so Varmint profile. I guess I need to look at barrel profiles to see how much larger that is.
A bottom bolt release action can be made to fit with a little clearance in the trigger guard area.
Bookmarks