Results 1 to 12 of 12

Thread: Not too shabby - part ii

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Basic Member
    Join Date
    Mar 2024
    Posts
    82
    Dave & Charlie,

    Thank you for the replies. Helpful.

    Over the years, I've owned multiple rifles of another manufacturer, each rifle repeatedly, dependably delivering well under MOA. I may go that route again? Was just asking for options.

    Thanks again.

    Cheers.

  2. #2
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    49
    Posts
    6,500
    Definitely possible, but you have more factors to contend with - the main one being increased barrel harmonics with a smaller contour. I would actually say 1/2" to 3/4" is pretty easy to attain with a properly worked up handload, even with a pencil barrel. Smaller than that is possible, but I wouldn't count on it being the norm unless you get a real hum-dinger of a barrel.

    The biggest thing is KNOWING and ACCEPTING that with a smaller/lighter barrel contour you're not going to be able to maintain accuracy over as many consecutive shots as you would in a heavy barrel due to heat buildup causing the POI to rise. The choice of cartridge will also affect this due to how much powder is being burnt. If you limit yourself to shooting 3-shot groups rather than the typical five you should be ok. In a smaller cartridge (.22 Hornet, .222, .223, etc.) you can often still get away with 5-shot groups before heat becomes an issue, but once you step up to a .308 diameter case there's too much powder being burnt to stick with 5-shot groups.
    "Life' is tough. It's even tougher if you're stupid." ~ John Wayne
    “Under certain circumstances, 
urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain

  3. #3
    Basic Member
    Join Date
    Jun 2018
    Location
    las cruces, nm
    Posts
    2,758
    Quote Originally Posted by Taidog1 View Post
    Dave & Charlie,

    Thank you for the replies. Helpful.

    Over the years, I've owned multiple rifles of another manufacturer, each rifle repeatedly, dependably delivering well under MOA. I may go that route again? Was just asking for options.

    Thanks again.

    Cheers.
    Well under MOA is a LOT different than under 0.5MOA consistently. I would hazard that most Savages will do under MOA with the right loads and some offer more leeway in that regard. There are very few off the shelf rifles that can consistently shoot under 0.5MOA with factory ammo. There are exceptions but it is still a crap shoot at that level. Quite a few in this forum have Savages that have done it, just not all of them.

Similar Threads

  1. Not too shabby
    By Taidog1 in forum 110-Series Rifles
    Replies: 9
    Last Post: 03-16-2024, 08:32 PM
  2. Part ID help.
    By Predator1 in forum 110-Series Rifles
    Replies: 3
    Last Post: 02-17-2018, 05:15 PM
  3. Looking for a Part
    By brgipple in forum 110-Series Rifles
    Replies: 6
    Last Post: 07-03-2016, 02:02 AM
  4. Big Ones Part 2
    By scope eye in forum Off-Topic
    Replies: 2
    Last Post: 02-18-2014, 03:10 PM
  5. Need help part 2
    By Jwatson72091 in forum 110-Series Rifles
    Replies: 2
    Last Post: 03-06-2012, 03:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •