110 Precision AICS Magazine lengths?

[Bottleneck Jimmy]

224 Clark, dimensioned image here, https://loaddata.com/Cartridge/224-Clark-Load-Data/3156

i've found references to 30-06 in 3 different mag lengths on the MDT page, 3.560", 3.715" and 3.850" (poly), what matters is what Savage offers in their OEM MDT chassis. 30-06 is not an available chambering. i'm planning to test 85's, 90's or more so maybe slightly more OAL? that's why i said the MDT MED(ium) 3.240" mag might work, the 30-06 / 300 WinMag 3.560" will work for sure. FWIW i have dies, brass and some bulk 55gr's for fire forming in a cheap rechambered barrel from EABCO before sourcing a quality fast twist barrel for the heavies

[Dave Hoback]

Here is the one you want directly from MDT. And in 3.715”.
https://mdttac.com/30-06-mdt-metal-aics-magazine/

Did you read the details under this magazine about MDT Chassis? The part I highlighted especially.

[Dave Hoback]

If you read further, it states if using an Axis in Long Action, the 3.515” must be used because the Axis Chassis are made for that length, as well as Tikka.

Honestly, I would prefer the Accurate mag over the MDT. https://www.brownells.com/gun-parts/...-30-06-spring/

[Bottleneck Jimmy]

yes i've seen it many times over the last couple days. the next note below the one you highlighted leads me to believe that Savage and MDT commercial chassis's are not necessarily the same, Savage can spec any mag they want and MDT agreed to supply then under contract. yes i've tried calling Savage but gave up on hold for too long, and searched 3rd party vendors for the mag length spec, next step is email message and wait / hope they respond. then hope they'll provide the info? from what i've seen they play their cards close. BTW, i'm not looking at Axis, it's the 110 Precision Left Hand as i linked in the OP. also FWIW, the Savage 110 Precision LH chassis (LSS-XL GENII) does not appear on the MDT page, further convincing me that they may be built to spec / contract

[Dave Hoback]

Actually, looking further, the MDT Chassis for 110 Long Action cartridges all use 3.850CIP length Mags. It’s listed under choosing Savage LA. (Pic below) And, Yes, I know you are using the 110, not the Axis…this is the 110 section. Also, I read every post entirely in a thread before answering. I was simply making a point. So it’s actually the 3.850” needed for Long Action. But I get what you’re saying. Just need someone with a Long Action 110 Precision or Elite to post.

[Bottleneck Jimmy]

FWIW the Elite (Impulse?) uses MDT's ACC chassis.

low traffic or low market saturation?

[Dave Hoback]

Yes, and I believe they are the sameas sold by MDT & retailers and through Savage on the Rifles. Because I do know the 110’s in 338LM do in fact use a 3.850” mag. So why would Savage order the Chassis in 2 different mag length sizes for the Long Actions? It would not be cost effective. But then, with the Brain Children running Savage Arms, who knows?

[NF1E]

Just to add a little confusion to the game. I recently dropped a couple of my Savage LAs, older with upper bolt release, one in .223 and the other .308 into ORYX chassis and both take a 3.715 mag length.

I have an unused Accurate-Mag .308 Win 3.85 length if someone needs it.

[want2ride]

FWIW the Elite (Impulse?) uses MDT's ACC chassis.

low traffic or low market saturation?

The Impulse is not a 110. If you have a question regarding the Impulse please route it to the Impulse section.

[Bottleneck Jimmy]

i'm aware the Impulse is not a 110, but there is an Impulse Elite that i was momentarily unsure if that was what Dave was referring to

any interesting info regarding what 110 Elite Left Hand chamber comes with what length AICS mag ?