Magazine help

[pdog06]

Don’t think Walters will fit.

You need the plastic capped one with the plastic release lever on it like the one Dave posted.

Also, I see your plastic trigger guard is cracked. Very common issue. Just an fyi In case you didn’t know, Gunshack sells a metal replacement one for the plastic.

https://www.gunshack.com/index.php?r...roduct_id=3580

[Dave Hoback]

I’m looking at the OP’s pictures now. The one showing the bottom metal, that is a release lever in the front, yes? Or is there no thumb release in the bottom metal? The picture below is a 10P-SR. If the OP’s rifle looks like this, I believe the correct mag should be the 55105 magazine.



Here is the magazine supplied with this rifle. Which sure looks like a 55105 magazine to me.