Single shot mag adapter

[Dave Hoback]

What cartridge is your rifle? Which of the adapters do you have? Is it the “Fred Sled” or one of the single shot loading ramps? Reference here: http://www.sharpshootersupply.com/LoadingRamps.html Does your Model 10 have the Metal magazine surround as indicated on the page?

A couple pictures of yours & how it fits would help us identify what is going on better. You can 3rd party host through many sites. I use https://imgbb.com/

Is it Blind Mag or removable magazine? If you just have the follower plate adapter, it’s not meant for a removable magazine rifle. That would be the “Fred Sled” needed.

[pdog06]

You will need to make a spacer to put in the mag well to get it to the correct height. Can be a pc of wood,expandable foam, etc.. And it doesn’t necessarily need to be fixed to the stock. It can just sit in there loose so it can be removed if needed.

Most of the stocks I use allow it to rest on some of the inletting in front of the rear pillar, but since yours won’t do that a spacer is the easiest way to go.