I would try using washers " the ones used to rebuild faucets work fine" and you can modify them to your needs, or electric tape before doing anything else just to see if it makes any difference. Before I started using hanger bars I had barrels and factory forends that shot great as is.
I did my own.
Not too difficult. Got the pillars off ebaY and used the Brownell's bedding kit for the epoxy. Had to machine the rear post to give clearance for the sear. Dremel and file work. Bedded the floorplate as well while I was at it. Very solid results.
"They couldn't hit an elephant at this distance." Last words of Gen. Sedgwik
Found someone. Thanks guys.
It’s really not difficult. Guys… I do all this stuff with one arm/hand, one eye… I’m half cripple, half retarded from brain damage from head injury & in pain 24/7. It’s really not difficult. Just need to overcome the fear of doing such & such. Everything I do I learned online & taught myself.
But I wish the best, if you found someone you’re comfortable with and hopefully it’s not costing you an arm & leg.
Posting Permissions
Reply With Quote
Bookmarks