That's what I used on mine.
I approached a bit different. I cut the stock (Model 12) kinda like the Boyd's AT-one.
That's what I used on mine.
I approached a bit different. I cut the stock (Model 12) kinda like the Boyd's AT-one.
The Choate tactical is plastic. Cutting it is above my skill level. The link below is the part that I ordered. I have a Kydex wrap-over adjustable from a previous stock. I want to avoid drilling the stock. Not to mention, the large adjustment knobs annoyed me. Thanks for your input though.
https://www.riflestock.com/store/pro...l-cheek-piece/
I do understand the problem. I tried other ways, including the lace on leather cheekpieces and I also tried modifying the replaceable plastic cheekpieces from Choate and Magpul like the one you posted. I shaped them and then used some velcro to secure them None really worked the way I wanted. I also don't like the big knobs so I use set screws that tighten down below the lever of the threaded insert on my setup.
You could use a Kydex cheekpiece and apply velcro on both sides to position and attach?
Worthy considerations. It occurred to me that the threaded inserts are screwed in and not pressed in. I plan to try to find samples locally to see what I can come up with. I've used the neoprene sleeves with foam inserts on both wood and plastic stocks. They work well on the wood stock, not well on the plastic. Shooting prone, the foam inserts slide off the top of the buttstock, despite a tight sleeve. Thanks for the feedback.
YW. The threaded inserts are found at any hardware store.
I’m cheering you on to do the threaded inserts. You think it’s above you, but honestly brother… it’s easier than you think. I would be happy to walk you through it. Tell you exactly what you need & how to get it done successfully. Those inserts in 1/4-20 will work perfect! Here are some steel which cost a bit less. https://www.amazon.com/SG-TZH-Threaded-Furniture-Spanner-Blue/dp/B08QCTGMWX/ref=sxin_17_pa_sp_search_thematic_sspa?content-id=amzn1.sym.6fd80408-71b6-44da-b059-082bba9089d3%3Aamzn1.sym.6fd80408-71b6-44da-b059-082bba9089d3&crid=217BK7CM96GSG&cv_ct_cx=Threaded% 2BInserts%2B1%2F4-20&keywords=Threaded%2BInserts%2B1%2F4-20&pd_rd_i=B08QCTGMWX&pd_rd_r=98a4bb9b-11ef-43ea-b2e1-33ebef8ab3d3&pd_rd_w=Romuc&pd_rd_wg=HChhR&pf_rd_p= 6fd80408-71b6-44da-b059-082bba9089d3&pf_rd_r=XGNV6WRVBX1EM1SZA3N1&qid=1687 317511&s=industrial&sprefix=threaded%2Binserts%2B1 %2F4-20%2Cindustrial%2C79&sr=1-3-364cf978-ce2a-480a-9bb0-bdb96faa0f61-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0a WM&th=
And here are the press in style 1/4-20 in Stainless.
https://www.amazon.com/dp/B0BVF8Z3HD...7fc737124&th=1
I wasn't a fan of the large "grab knobs" either. I went with something like this: https://www.midwayusa.com/product/1024069441?pid=304164
Bookmarks