Results 1 to 23 of 23

Thread: Got my new 110 Hunter

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Basic Member
    Join Date
    Apr 2023
    Posts
    46
    Thanks for the input.
    I'll order up one of those springs.
    Going to try and find some 68-69gr. Bullets.
    Failure is not an option

  2. #2
    New Member
    Join Date
    Jun 2017
    Posts
    6
    Sounds like a nice rifle! Can't wait for the range report!!!

  3. #3
    Basic Member
    Join Date
    Jun 2018
    Location
    las cruces, nm
    Posts
    2,748
    Be aware that not all match bullets are the same. I've had good luck with the Sierra SMK/TMK and the Hornady ELD's. But not the 'std' Hornady BTHP bullets. Nosler 69 and 77gn BTHP match bullets are close to the Sierra. Bergers are really good as well, but, even more pricy. They also like to loaded into the lands, which can be tricky.

  4. #4
    Basic Member
    Join Date
    Jul 2021
    Location
    Savannah, GA
    Posts
    245
    My 110 Storm in .223 shoots the Frontier .223 55 grain OTM lights out. They are a little less expensive and worth at least a try IMO.

  5. #5
    Basic Member
    Join Date
    Apr 2023
    Posts
    46

    Range Report

    Had first Range day yesterday.
    Did a short brake in then fired for groups.
    Most groups were 4 shots, however the 2 groups shown are 5 shots. After each group I cooled the barrel with an air barrel cooler.
    Seems most groups had a first round flyer taking them to about 1.5 moa. Love the Accufit AccuStock.
    Nice crisp trigger, but a bit to heavy at #3.8
    Savage is sending a new trigger spring, but won't send the target spring.
    I will most likely replace barrel with a Shilen in
    6 Creedmoore as I have a line on a Predator
    in .223
    Attached Thumbnails Attached Thumbnails 20230522_150311.jpg   20230521_102152.jpg  
    Failure is not an option

  6. #6
    Basic Member
    Join Date
    Mar 2017
    Location
    Central Arizona
    Posts
    450
    Does that stock have pillars? If you are going to rebarrel it anyway and just bought it for the action get a stock that has pillars and is bedded. That will solve your 1st shot flyer issue, if it is even an issue.

  7. #7
    Basic Member
    Join Date
    Apr 2023
    Posts
    46
    Quote Originally Posted by prdatr View Post
    Does that stock have pillars? If you are going to rebarrel it anyway and just bought it for the action get a stock that has pillars and is bedded. That will solve your 1st shot flyer issue, if it is even an issue.
    It is the AccuStock, full aluminum bedding
    Failure is not an option

Similar Threads

  1. 111 Long Range Hunter or Bear Hunter Brake question
    By Strutnut in forum 110-Series Rifles
    Replies: 9
    Last Post: 09-03-2015, 08:22 PM
  2. Bear Hunter or Long Range Hunter
    By Strutnut in forum 110-Series Rifles
    Replies: 5
    Last Post: 04-07-2015, 01:47 AM
  3. Replies: 2
    Last Post: 11-02-2014, 10:18 AM
  4. Boyds Classic or Prairie Hunter for hunter build?
    By mattri in forum 110-Series Rifles
    Replies: 16
    Last Post: 06-03-2014, 10:29 PM
  5. leupold hog hunter scope fitting on a .338 Savage Hog hunter
    By 4IDARCHER in forum 110-Series Rifles
    Replies: 1
    Last Post: 05-15-2014, 07:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •