Oh yeah, electrician is running plenty of 220 juice to it. Explained to him between the heat pump and welder, I'd need it. Basically I'm building a shorter rifle to use from my smaller shooting houses. Gets kinda tight with even a 24" barrel. Haven't decided on whether I'm going to shorten the barrel to 20" or 22". About the furthest shot I'd make where I hunt is 300 yards. I plan to start with 140gr Gamekings. I'm not that versed in reloading yet, still learning the basics from a buddy of mine with years of experience. He figures with a 20" barrel, the best I can look for is somewhere around 2600fps give or take. I'm also shortening the pull by 3/4" so I'm not reaching for my relief when I'm all layered up when the temps drop....a problem I always have with my Mod 11 270WSM plastic stock. That one will probably get a new stock next year with the short pull.