Trying to identify what barrel nut for 110 action

[Dave Hoback]

e was made 1982 to 1989
large shanks came out in 2002

Ahh.. yes, glanced over that. Thank Avenger. Yeah, the Large Shank Actions were made a short time after the inception of the WSM cartridges. So you have a Small or Standard Shank, as it is also called. So, here are your options.

Factory Savage Barrel Nut. (Not recommend)
https://www.gunshack.com/savage-part...ut-small-shank

Aftermarket Machined. Available from several different sources.
https://northlandshooterssupply.com/...t-small-shank/

These use flats for a standard wrench.
https://patriotvalleyarms.com/barrel...emage-barrels/

https://tromix.com/product/savage-barrel-nut-flat-side/

https://omrifles.com/products/barrel-nut

https://blackcollararms.com/product/barrel-nuts/

The Bug Nut.
http://www.bugholes.com/product-p/bu...0tpi-1.20b.htm

A Couple outliers.
https://aprifles.com/products/apr-lo...rel-nut-system

https://www.zermattarms.com/?product...int-barrel-nut

This is the nicest Barrel nut made, but oh so expensive, & uses a proprietary wrench which must also be purchased through them.
https://www.ultimatumprecision.ca/products/barrel-nut

This one is very close to the Ultimatum barrel nut. I use this one & love it.
https://internationalbarrels.com/pro...it-barrel-nut/

Here are a bunch of pics.

[tallow98]

Thanks for the answer. Saves me time. Now I have to look at stocks

[Robinhood]

This should be a sticky

Ahh.. yes, glanced over that. Thank Avenger. Yeah, the Large Shank Actions were made a short time after the inception of the WSM cartridges. So you have a Small or Standard Shank, as it is also called. So, here are your options. Factory Savage Barrel Nut. (Not recommend) https://www.gunshack.com/savage-part...ut-small-shank Aftermarket Machined. Available from several different sources. https://northlandshooterssupply.com/...t-small-shank/ These use flats for a standard wrench. https://patriotvalleyarms.com/barrel...emage-barrels/ https://tromix.com/product/savage-barrel-nut-flat-side/ https://omrifles.com/products/barrel-nut https://blackcollararms.com/product/barrel-nuts/ The Bug Nut. http://www.bugholes.com/product-p/bu...0tpi-1.20b.htm A Couple outliers. https://aprifles.com/products/apr-lo...rel-nut-system https://www.zermattarms.com/?product...int-barrel-nut This is the nicest Barrel nut made, but oh so expensive, & uses a proprietary wrench which must also be purchased through them. https://www.ultimatumprecision.ca/products/barrel-nut This one is very close to the Ultimatum barrel nut. I use this one & love it. https://internationalbarrels.com/pro...it-barrel-nut/ Here are a bunch of pics.

[Blue Avenger]

if you have time Dave, format it as an article and submit it to Jim!

[Dave Hoback]

if you have time Dave, format it as an article and submit it to Jim!

Unfortunately, I can’t format anything anymore. Everything I do is on my Iphone from now on. Lap top bit the dust, so the only computer in the house is my wife’s work laptop. And since I have no need, I wasn’t planning on buying another. So, unfortunately I can’t send things in any kind of special format. Can only email things as they are.

But no biggie. I don’t mind doing this again in the future if someone else asks a similar question or would just like to know.

Also, if anyone else can or has the correct formatting ability, sending things as jpegs or whatever.. (I’m not really all that PC literate, LOL!), by all means, please do so. I think it would be great to show people all the options these days.