Yeee-UP! You gots a 3-screw there ya do! I can do fine, fine things to those. Set up properly those are the finest triggers Savage makes. Modification & proper set up they perform on par with pretty much any aftermarket trigger. Good stuff!
EDIT: I know for a fact, the OP’s picture is a 3-screw. If a trigger has the Sear adjustment screw, it is by definition, a 3-screw trigger.
Ive always called these 3-screw. In the picture, the rear most screw is just difficult to see because it’s adjusted all the way up. Here is his pic blown up.
This is what I’ve always called a factory 2-screw. It does not have the Sear adjustment screw. But I could be wrong. Still.. I can do nice things to that trigger & make it quite nice!
Yup that's how I have always heard them referred. 1 screw is just safety engagement, 2 screw is safety and over-travel, and 3 screw is sear and safety and over-travel engagement adjusts. If its got the sear screw then it's a 3 screw. Maybe there is some odd-ball out there I have yet to encounter idk but yes OP trigger is the 3 screw.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
I have since had a chance to look at my inventory. I have both the old and the new style 3 screw. You are correct David. I missed that one.
The Dunning-Kruger effect is alive and well.
Yes, they look different. The older 3-screw, like this, just had that roll pin, to hold the Bar-spring. The new ones were very nicely milled steel with a portion of it’s own to hold the Bar-spring.
Sweet! I’m becoming more enthused with this find every time I learn something new.
Bookmarks