Results 1 to 10 of 10

Thread: Savage 110 (Bottom Bolt Release) with Timney Trigger

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    New Member
    Join Date
    Jun 2022
    Posts
    4

    Savage 110 (Bottom Bolt Release) with Timney Trigger

    I own a Savage 110 (Long Action) with Bottom Bolt Release. Today I installed a Timney trigger. The installation was very quick and easy to do, as well as all the settings. Unfortunately, the trigger does not fit in my Savage 110 stock because of the sear engagement screw (meets the Bottom Bolt Release). It says on the Timney homepage: "Bottom Bolt Stop Release rifles will accept our trigger but need modification to sear engagement screw". Unfortunately I could not find instructions to this "fix" on the internet. Does anyone have a hint/link or maybe even instructions? That would be great!

    By the way: If I completely remove the sear engagement screw and set my overtravel appropriately low, then I can insert the trigger into the stock and the trigger works perfect! It then also does not trigger randomly and breaks safely at about 1.5-6 lbs. Maybe that is the solution as well? Or is there something that argues against that? I will also make a test the days on the shooting range, so far everything was tested dry with buffer cartridges.

    Greetings from Germany!
    Felix





  2. #2
    Banned
    Join Date
    Jan 2016
    Location
    Suburb of Filthadelphia.
    Age
    45
    Posts
    5,704
    Get rid of the nut on the Sear screw & either shorten the one you have, or get new shorter set screw. Then just use locktite on the like the SAV-1. Done & done.

    The SAV-1 doesn’t use the locknut because it’s not necessary. Locktite will work very well.

  3. #3
    Banned
    Join Date
    Jan 2016
    Location
    Suburb of Filthadelphia.
    Age
    45
    Posts
    5,704
    See the difference compared to the SAV-1 Sear screw?






  4. #4
    New Member
    Join Date
    Jun 2022
    Posts
    4
    Hi Dave!
    Thanks you for your answer! I had also considered this, but was unsure whether Loctite (blue / medium strength?) holds the whole screw safely. I am going to do this now.

    For my understanding (because it just works at least with dry firing): What is the disadvantage of not using the sear engangment screw at all? Is it just the characterstics of the trigger? I have not recognized an influence on the safety or function.

    Felix

  5. #5
    Banned
    Join Date
    Jan 2016
    Location
    Suburb of Filthadelphia.
    Age
    45
    Posts
    5,704
    Yes, there is no safety issue not using the Sear adjustment screw. It simply adjusts the height of the sear & trigger surfaces catching. Actually, not using the screw is the most secure, but will have noticeable trigger creep. (That’s when you can feel the trigger moving considerably before it releases.) I do prefer having the adjustment.

  6. #6
    New Member
    Join Date
    Jun 2022
    Posts
    4
    Thanks again! That helps me and gives me some security, because I want to hunt with the Savage tonight. At the weekend I will then shorten the sear engangement screw and glue with Loctite, as described by you. Two questions remain and I hope you can help me again:

    1. Is medium strength Loctite enough? With high strengh Loctite I'm afraid I'll never be able to loosen it again.
    2. Because of interest: Does the original Accutrigger have some sort of sear engangement? When I look at the design, it looks like it doesn't have one. My currently installed Timney (without sear engangment screw) looks like it operates technically the same way as the "old“ Accutrigger at this point.

    Felix

Similar Threads

  1. Bottom bolt release trigger weight vs top bolt release
    By Jtracing919 in forum 110-Series Rifles
    Replies: 6
    Last Post: 02-01-2022, 12:13 PM
  2. Savage 10 bottom bolt release metal trigger guard.
    By Buster95 in forum 110-Series Rifles
    Replies: 0
    Last Post: 04-26-2018, 04:01 PM
  3. Timney Trigger & Bottom Bolt Release???
    By RMGunner in forum 110-Series Rifles
    Replies: 2
    Last Post: 01-23-2016, 01:36 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •