Quote Originally Posted by Scttschnd View Post
I have no sawed or shortened any springs. Just pulled the Accutrigger and installed the Elftmann. Not sure why reinstalling the OEM trigger is affecting it but it sure made an instantaneous correction once it went back in the rifle.
I have seen where limiting the trigger over travel has interfered with the sear travel causing light primer strikes. I don't remember which trigger it was with but the sear drug on the top of the trigger in the big radius. Don't know if that can happen with the elf but it is the first place I would investigate. That also includes the cocking piece pin where it is released by the other end of the sear part. Of coarse I have done some crazy chit before, so I could be way off.