Results 1 to 25 of 47

Thread: 12BVSS new barrel (6BR)

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Basic Member
    Join Date
    Jun 2018
    Location
    las cruces, nm
    Posts
    2,746
    Yep, Varget for all of this. :) The 108gn had a node at the 28.9gn point, which was almost the same vel as the 103gn at 28.0gn. I tried both at the higher node as well and had same difference in accuracy, but the 108s at the higher node had some sticky cases. Still is a bit baffling. It is probably just a twist rate and CG location issue. The rifle does fit better since I modified it with an adjustable cheek piece. I also got some N150 today, mainly for my cast bullet loads, but, might try it in this gun as well.

    Dave, Thanks. Yeah 1/4MOA is new territory for me. I am hoping this is not a one time deal. After all, if you shoot enough eventually the bullets will go in the same spot :)

    Gren, I think you may be right about the 108's. I don't have any more and probably won't ever buy anymore with the Vtac's doing this well. I used Bergers in my .308 and they did well, but, only if touching or jammed a bit into the lands. Given the cost I will stick with the Vtac's. And I will try the higher node with these to see how well they do. Since I don't compete I am happy with these and the lower vel of the BR vs BRA or other cartridges. I did think about the choice a lot before I bought the barrel. It was a tough decision between the BR, BRA, 6x47 and 6CM. The 'moderate' velocity levels (and resulting longer barrel life) along with no case mods was why I stuck with the BR.

  2. #2
    Basic Member
    Join Date
    Jun 2018
    Location
    las cruces, nm
    Posts
    2,746
    So, I was out this morning with the Vtac's again. I fired the 28gn load again. As I suspected it was not a 1/4MOA group :) but it was 1/2MOA.

    I also loaded up 29.6, 29.8, 30.0 and 30.2gn loads. Those were a bit interesting. The upper two loads kinda 'overlapped' each other in velocity. They were still a bit less than MOA. I'm used to a 'bad' load being 2MOA :) The 29.8 load had an es of 19 and sd of 6, as well as two 5 shot, 0.7" groups at 200yd. Avg vel was 2925fps.

    Will go out next time and try the 28.0 and 29.8gn load against each other at longer range and see what they do.

    It is almost 'fun' to see mistakes in shooting. When the crosshairs move, so does the bullet. Amazing. :)

    Meanwhile I need to order a bunch more of these bullets. Glad Christmas is coming :)

Similar Threads

  1. 12bvss 223
    By jp81 in forum 110-Series Rifles
    Replies: 15
    Last Post: 06-08-2017, 11:18 AM
  2. 12bvss in 308
    By jon8777 in forum Ammunition & Reloading
    Replies: 14
    Last Post: 09-24-2014, 09:31 PM
  3. 12bvss in 308
    By danf26 in forum 110-Series Rifles
    Replies: 8
    Last Post: 12-27-2013, 12:53 PM
  4. savage 12bvss barrel vs aftermarket barrel
    By GSRswapandslow in forum 110-Series Rifles
    Replies: 3
    Last Post: 01-25-2012, 04:35 PM
  5. Replies: 2
    Last Post: 02-02-2010, 09:49 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •