I decided to try to build a rile from scratch. Right after Christmas I ordered from NSS items I thought I needed.
turns out I did not need a follower if using the savage 10 receiver from the site ACIS mags won’t feed due to bolt not coming back far enough to engage. I ended up ordering a bolt face from sharp shooters supply due to not locating a .223 extractor which is ever so slightly longer than the .308 extractor that came with the Action.
Model 10 Shot action ACIS NSS
shilen heavy spotter 1 in 9 select match NSS
misc bolt face parts NSS
go/no go NSS
bell and Carson stock website
.223 trued boldface sharp short supply
All Had super fast shipping and I was ready to build in under A week.
my son had taken the action screws to dallas so I had to make some from bolt as at Ace
all in all the build went pretty well everything fit except removing the excess paint in the mag well with a razor blade.
Topped it off with a vortex strike eagle from govX
Reply With Quote
Bookmarks