Axis II precision multiple issues with new rifle out of the box!

[Mr.Snerdly]

I just came in from shooting the 22-250. I also have some CCI primers just like the ones pictured in the above post, No. 41 for 7.62mm Ammunition but it doesn't say "Large Rifle Military Primers". I had a misfire on 1 out of 12 rounds. First time that has happened in the 22-250 but also the first time I have used these primers.

[Racegunz]

I just shot a few groups after cleaning the bore and no impressive groups so far with any ammo, the best being about .75" and the worst nearly 2". When looking things over I noticed off center firing pin strikes on the primers. My critical thinking tells me this is not a good thing as the firing pin hole doesn't look to be off center in the bolt and if it is not off center then that means potentially the bore is off center of the bolt. Also noticed all shot brass has a flat side on the mouth inline with the short side of the offset primer strike........ I think a call to savage is in order on this.
Has any one else noticed this in their AXIS?

Note Savage closed my online warranty service request without ever talking to me or commenting.