The misfiring is a hard primer issue. Been there done that, it’s a real PITA on my blackout. Get a stronger firing pin spring or shoot 223. None of the above “issues” are a big deal. Man up and take care of them your self.
Sent from my iPhone using Tapatalk
Yeah, can't make my own stronger firing pin spring, but I did make a pre-load spacer in my shop today and checked the firing pin penetration which was at .050 so good there. The preload spacer got me to about 80% on the military spec ammo and 100% on the factory .223. sourcing my own screws on a new gun is not what I would call "manning up" but to each there own I guess. Thanks for the helpful suggestions.
Posting Permissions
Reply With Quote
Bookmarks