Quote Originally Posted by Robinhood View Post
Can you please supply links to where someone errantly posted that Push Feed bolt heads do not work with Stagger Feed magazines?
The only way that it would not feed is if the feed lips were not correct or you are using the wrong magazine for the cartridge(ie...7 rem mag in a 30-06 magazine).

If you replace your control round bolt head with a push feed bolt head you will need to remove the V ejector that is attached via the trigger hanger pin, and you will need to set head space. One of the things you will notice is that bolt operation is often slightly smoother due to the ejector not pushing on the bottom of the bolt.
I have literally read through hundreds of posts, and I dont care to dig back for all of them but this is one. Third post down. And trust when I say I read similar statements elsewhere and more on here.
https://www.savageshooters.com/showt...rol-feed-rifle

If its not true than that's great, but I ll see for myself when the gauges get here. Thanks for the info.