Reply With QuoteUPDATE: Found the issue, the Choate comes with a plastic spacer that fits between the l-bracket and the stock and was just about 1-2mm to long. Trimmed it down and was able to get it put back together without issue and bolt moves great now.
Good evening, been a while since I have posted but have a question for the folks here. Just got a Choate Tactical Stock and was attempting to put my Savage model 11 in it and have run into a bit of snag. My mod 11 is a blind magazine and ordered the stock for blind magazine, however the magazine doesn't seem quite deep enough and it seems to not set flush like it should. It tilts up just a little at the chamber end. So question is do I take a little of the bottom of the magazine well in the stock, take a little of the bottom of the magazine and will that keep it from tilting up? Thanks guys, already know I have to take some off the front action screw as it is much to long.
UPDATE: Found the issue, the Choate comes with a plastic spacer that fits between the l-bracket and the stock and was just about 1-2mm to long. Trimmed it down and was able to get it put back together without issue and bolt moves great now.
Good news
Posting Permissions
Bookmarks