.308 to 6mmBR advice

[Iowa Fox]

Well if it were me with a 6mm, I'd skip the BR and go with a Dasher and 4 groove Brux barrel.
Or skip the 6mm, and do a straight 284 Winchester and 180 class bullets.

Yep!

[GrenGuy]

powderburnz, at this point in Your shooting experience, My recommendation is go with a Drop In Straight 6mmBR. This, IMO, will give You the experience necessary to move forward later, in areas like custom spun barrels, and formal competition.

Since You “only compete with Yourself”, what would You consider victory? You will be amazed what You can do with a straight 6mmBR, out to 1,000yds.

Good Luck With Your Decision

[powderburnz]

powderburnz, at this point in Your shooting experience, My recommendation is go with a Drop In Straight 6mmBR. This, IMO, will give You the experience necessary to move forward later, in areas like custom spun barrels, and formal competition.

Since You “only compete with Yourself”, what would You consider victory? You will be amazed what You can do with a straight 6mmBR, out to 1,000yds.

Good Luck With Your Decision

Brux
Stainless MTU contour
27 “ 8 twist
Muzzle tapped 5/8-24


Planning on using Erik Cortinas EC tuner brake


Lapua brass
Berger 108’s