If you can find a right handed stock that meets your criteria, it's easy enough to convert it to left handed by cutting a relief for the bolt in the correct place, filling in the right hand bolt cutout with epoxy.
I usually drill a couple of tiny holes inside the bolt cutout to create a mechanical lock, then build a fence that follows the contour of the stock using tape and wax paper on both sides before filling with JB weld from the top. Then after it sets a minimal amount of filing to smooth any proud spots. Follow it up with a paint job of your choice if the slight variation in color bothers you. I like a sponge camo paint job. In my opinion it gives it that custom touch and is really easy to do.
Here's a right handed factory unit I converted from right to left as well as shortening the stock and reshaping the recoil pad, bedding, making a kydex cheek riser etc.. on a model 11 .308 carbine project a few years ago.
Sometimes we just have to get creative.
Bookmarks